Stain That Fence! takes pride in making sure your fence is cleaned and repaired prior to staining and sealing. As with any staining project it is important that your substrate (wood fence) is properly prepared. The surface of your fence must be clean, dry and free of dust, dirt, mildew, oil, water and other contaminants. Weathered wood must be cleaned with a special solution prior to staining to kill any mildew spores present. This will insure that the stain and sealer will penetrate through the wood for maximum protection.
(214) 303-9939
SERVING NORTH DALLAS SINCE 2006
SERVING NORTH DALLAS SINCE 2006
Stain That Fence! uses a low pressure / high volume system to apply the stain and sealer. This insures that every part of the wood is saturated and protected. By saturating the surface of the lumber it allows our stain to penetrate deep into the wood leaving the fence with an even, uniform finish. We use a stain and seal process that provides the best quality preservation and protection available for your exterior wood fences, decks, arbors, and any wood structures. Our made in Texas
EXISTING
CLEANED
STAINED/SEALED
Our trained restoration technicians are able to assist you with any questions you may have. They also receive ongoing training to ensure they are up-to-date on the most current and effective application techniques in the industry. What does this mean to you? It means you will receive professional service and professional results, guaranteed to protect your valued investment!
THE FENCE RESTORATION PROCESS
Day 1 Preparing the fence: Cleaning and Repair
Day 2 Staining, Sealing, and Clean up:
